框格梁定型塑料模板的樣式為方型或矩形框，選擇十字交叉連接結構，運用支撐桿和螺絲進行連接，方便工人施工和操作。塑料應用ABS。與其他塑料材質相比，ABS材質較硬，可承受混凝土帶來的壓力，但使用次數較少，只能使用約200次。長期使用后，模具易破損。正常使用塑料模時，需小心輕放。使用塑料材質制作的混凝土制品表面更光滑，脫模速度更快。

框格梁定型塑料模板的優點：

1.剛性好，穩定性高；Good rigidity and high stability;

2.可適應大跨度梁板的施工需求；

3.承載能力強，適用于大型建筑工程。

框格梁定型塑料模板會(huì )通過組裝、灌漿、振搗、排氣、成型、脫模、養護這幾個步驟進行應用，如果是隨意操作的話，無法保證框格梁的施工合格，錯誤使用模板的話，不僅會(huì )出現成品質量不足的問題，甚至會(huì )對模板造成傷害，需要在了解應用方式的前提下進行模板的使用，否則會(huì )出現施工事故。The shaped plastic formwork for frame beams is applied through several steps such as assembly, grouting, vibration, exhaust, molding, demolding, and maintenance. If operated arbitrarily, it cannot guarantee the construction of frame beams. Moreover, if the formwork is used incorrectly, it will not only cause insufficient of the finished product, but also cause damage to the formwork. Therefore, it is necessary to use the formwork while understanding the application method, Otherwise, construction accidents may occur.